Pump Accessories

The Mac3 Level Regulators are a float switch that allows electrical equipment to start and stop automatically (usually pumps, but also solenoid valves, alarms, etc.) when a prefixed level has been reached. Inside the device there is a microswitch that,...

Fast Water Tank or Cistern Float Valve Fill with Adjustable Arm (Ballcock Alternative) QuickStop Advance Float Valves are hydraulic water level regulators with a hydraulically operated closure. Designed as a replacement to conventional ballcock valves in...

Fast Water Tank or Cistern Fill with this Ballcock Float Valve Alternative QuickStop float valves are hydraulic water level regulators with a hydraulically operated closure. Designed as a replacement to conventional ballcock valves in water tanks to...

Compact Magnetic Float Switch for Dirty Water and Sewage Water The Agma W has now been replaced by the Agma W Evo. The AgmaW from Mac3 is a compact float switch alternative. IP68 rated it is designed to be fitted for direct mounting on a submersible...

Counterweight for Float Switch to Control Water Levels in a Tank A 200g counterweight can be threaded then fixed onto the Float Switch cable to weight the pivot point of the float switch at a set depth in your water tank. Takes up to 9mm...

Screw in Filter for Pump Inlet - Stainless Steel Mesh Stainless steel/nylon suction strainer with male threads and a 1.2 mm mesh. Often used in combination with a check valve (non-return valve) as a foot valve. Available in 1", 1¼ ", 1½"...

Float Switch for Tanks The Mac3 Level Regulators are float switches that allows electrical equipment to start and stop automatically (usually pumps, but also solenoid valves, alarms, etc.) when a prefixed level has been reached. Inside the device there...

In your rain water collection tank or water holding tank, debris will either float to the surface of the water (where it is lighter than water - oil, pollen etc) or sink to the bottom of the tank. These Floating Intake Filters allow the water to be...

This Multi-hosetail Reducer connects common garden hose sizes to pumps with BSP threaded outlets.         Comes in two different sizes to fit either 1" or 1.25" threaded outlets. Both hose tail adaptors fit hoses of 1", 3/4" and...

Small Float Switch for Tanks The Mac3 Level Regulators are float switches that allows electrical equipment to start and stop automatically when a prefixed level has been reached. They are generally used to control pumps, but can aslo be used to open or...

150mm (6") Plastic Float Ball Made from plastic and 150mm (6") diameter with protruding connection eyelets on either side (approx 25mm). Part of our Floating Intakes, here the round Float Ball can be purchased separately.

Pump to 32mm MDPE Pipe Connectors These compression adaptors are perfect for connecting the pump outlet to hard blue or black MDPE 32mm (1.25") water pipe. They have a male threaded connection to the pump outlet and a compression connection to the MDPE...

1" Spring Loaded Non Return Valve (NRV) Non Return Valve also known as a  one way valve - Spring Loaded with female thread. Max pressure 12 bar. Type York 103. Length approx 79mm, max diameter 53mm, Thread 1". Optional Extra 1" Stainless Steel Mesh...

Compact Magnetic Float Switch for Dirty Water and Sewage Water The new Mac3 AgmaW EVO is a compact wastewater float switch alternative, designed to be fitted vertically to a submersible pump. Unlike the previous model (Agma W) the EVO operates at an...

The Mac 5 Level Regulators are a float switch that allows electrical equipment to start and stop automatically (usually pumps, but also solenoid valves, alarms, etc.) when a prefixed level has been reached. Normally connected to a control panel or...

Glycerine Filled Pressure Gauge 0-10 bar Mega Pressure Gauge,  0 - 10bar with 1/4" bottom connection. Optional Extras Brass Connectors To connect the Pressure Gauge to your system it may be necessary to reduce the thread of your connections so that...

1 inch stainless steel hose clip suitable for securing 1" garden hose to hosetails etc.Size: 25mm to 40mm Type: W4 12 mm

Water Expansion Vessels - Various Sizes Also known as such as expansion vessels, pressure accumulators and surge arrestors. A pressure vessel prolongs the life of your pump by providing a reserve of pressurised water to your system. It therefore limits...

This superb Pump to Water Tank connector enables a water tank to be connected to a pump without any loss of water.This Kit connects a 3/4" BSP Threaded Tank outlet to 1" BSP Threaded Pump inlet. Fit the brass shut off valve to the lowest port in your...

1" Non Return Valve (NRV) A replacement non-return valve (one way valve) for the Steelpump range of pumps. Fits the 1" pump inlet. Can also be used in other situations. Total length of the NRV 96mm (including thread). Maximum diameter of the unit: 68mm...