Pump Accessories

Pump to 25mm MDPE Pipe Connector These compression adaptors are perfect for connecting a 1" threaded pump outlet to hard blue or black MDPE 25mm (1") water pipe. They have a male threaded connection to the pump outlet and a compression connection to the...

TeeTube Inline Cable Joiner - IP68 Waterproof TeeTube In-line (2 cable entries), 3 Pole, Screw - end barrier contact. Takes electrical cables 5mm to 13mm and a  4 mm max conducter size. IP68 rated so therefore perfect for use underwater and in...

The E-Fly Level Regulator is a float switch that allows electrical equipment to start and stop automatically (usually pumps, but also solenoid valves, alarms, etc.) when a prefixed level has been reached. Normally connected to a control panel or directly...

Tank Level Warning Display with Buzzer Alarm The RCALM from 3P Technik UK is a simple display panel that shows a warning light and sounds a buzzer when the water (or other liquid) in your tank gets to a low level. It also shows that the system is working...

TeeTube 3 Way Cable Joiner - IP68 Waterproof TeeTube T Electrical Cable Joint (3 cable entries), 3 Pole, Screw - end barrier contact. Takes electrical cables 5mm to 13mm and a 4 mm max conducter size.IP68 rated so therefore perfect for use underwater...

This ergonomically designed handle fits all horizontal SteelPumps brand water pumps. Makes your pump really easy to carry around when it is not used in permanent installations, for example when you need a portable pump that is used in various different...

The Pump to Turret Hose connects the Pump outlet to the Turret of your rainwater tank. Designed to fit vertical or horizontal PE, GRP or concrete water storage tanks where the pump is installed inside the tank and the pump has a 1.25" outlet. Ideal for...

Glycerine Filled Pressure Gauge 0-10 bar Mega Pressure Gauge,  0 - 10bar with 1/4" back connection. Optional Extras Brass Connectors To connect the Pressure Gauge to your system it may be necessary to reduce the thread of your connections so that it...

If you have installed your water pump inside a tank and wish to connect it to hard 1" MDPE Pipe then this piece of kit is for you. Suitable for connecting to the 1.25" threaded outlet of your pump. The 1.4m hose then can be taken out of the top of your...

Reinforced Suction Hose with Filter and Non-Return Valve Heavy Duty, Steel Reinforced, flexible, food grade Hose. Kit includes fine stainless steel mesh filter and Brass Non-Return Valve (one-way valve). Suitable for all water pumps with either 1" or 1...

Pump outlet reducer and compression adaptor to connect 1"hose to the 1.25" threaded pump outlet. For use, for example with the XAJE80P and XAJE80PFQ SteelPumps or any pump with a 1.25" threaded outlet.

Ball valve brass nickel plated 1 1/4" (DN32) female thread x male thread 25bar type 104. Easy use quarter turn lever handle. Technical Info: Handle material: steel Material seal: PTFE Temperature range: 0°C - 100°C Operation: lever Colour lever:...

3/4 inch stainless steel hose clip suitable for securing 3/4" garden hose to hosetails etc.Size: 16mm to 27mm Type: W4 12 mm

Submersible Pump Base (only) for Vertical Pumps This pump base fits vertical pumps 115mm to 130mm diameter (5"). Fits most 5" pumps that suck in water from the bottom of the pump. This water pump base is often used with a Floating Intake to extract the...

This New "green" Key float switch from Mac3 is gives you all the functionality of the original Mac3 Key. The only difference is that the body of this float switch is made from recycled plastic. Thereby reducing plastic waste and promoting the circular...

TeeTube Inline Cable Joiner - IP68 Waterproof TeeTube In-line (2 cable entries), 3 Pole, Screw - end barrier contact. Takes electrical cables 5mm to 13mm and a  4 mm max conducter size. IP68 rated so therefore perfect for use underwater and in...

Float Switch with Earth The Mac3 Level Regulators are float switches that allows electrical equipment to start and stop automatically (usually pumps, but also solenoid valves, alarms, etc.) when a prefixed level has been reached. This version of the Mac3...

If you have installed your water pump inside a tank and wish to connect it to flexible hose (garden hose or similar) then this piece of kit is for you. Suitable for connecting to the 1.25" threaded outlet of your pump. The 1.4m hose then can be taken out...

Service Kits for SteelPumps We have a number of Service Kits available for the SteelPumps brand of clean water pumps. To order your kit, please contact us with your pump model and serial number (found on the side of the pump) so that we can select the...

Submersible Pressure Transmitter 0.6bar with 10m of Vented Cable Submersible pressure sensors which are used to measure liquid level. The vented cable is used to cancel out the effects of atmospheric pressure by allowing air pressure to reach the...