Water Butts & Garden Watering

These large underground water tanks are prefitted with a 3P Flat Filter so that rainwater from a nearby roof can be pre-filtered before it is stored.  Installing an underground rainwater harvesting tank (with capacities from 6,000L to 20,000L) for...

The 32mm Flat Bit is ideal for making a 32mm hole in plastic water butts to take the 32mm hose in the Filter Collector Connecting Hose. It is included in the hose and Filter Collector Kits, however if you need a spare, here it is!

The 3P Rain Harvesting Pump Kit is designed to go in a rainwater tank. It is available with different length Pump to Tank Turret Hoses to ensure that you can easily connect up your MDPE pipework at the top of your tank. This easy to install kit consists...

This space saving 200 litre Corner Water Butt is a must for keen gardeners. The inventive design fits neatly into 90 degree internal corners. It comes complete with a stand and hoselock compatible tap.The planter section at the top has a drain hole. It...

WRAS approved 20000L water tank suitable for storing water above ground. It is also ideal for storing rainwater. This black water tank is manufactured in Britain from 100% recycled plastic. It is 2.6m diameter by 4.43m tall. The above ground water tank...

WRAS approved 10000L water tank suitable for storing water above ground. It is also ideal for storing rainwater. This black water tank is manufactured in Britain from 100% recycled plastic. It is 2.255m diameter by 3.05m tall. The above ground water tank...

WRAS Approved 5000L water tank suitable for storing water above ground. It is also ideal for storing rainwater. This black water tank is manufactured in Britain. It is 2.3m diameter by 1.68m tall. The above ground water tank comes with four lifting eyes...

Water pipe specifically for rainwater delivery in domestic systems. 25mm diameter in 25m coil.This black pipe is colour coded with 4 x green stripes along the length of the pipe. Also the word "RAINWATER" is printed along one side at approx 50cm...

Holesaw SET 72mm for DN50 seals & 32mm hoses Holesaw with Arbor Mandrel Drill Adaptor, to drill a 76mm diameter hole in thin wall plastic tanks. For use with the Pump to Turret Tank Connector. This size hole is perfect for the 50mm Rubber Grommet...

Long handle for the 3P VF1 Volume Filter Insert and Garden Filter Basket. For easy removal of the filter for maintenance in deeper installations. To use with the Garden Filter, simply remove the shorter handle that comes with the filter basket...

2" Tank to Tank Connection Kit This kit links two Utility Tanks together where the water tank has a 2" stub near the bottom of the tank. Idea for situations with some water pressure from standing tanks. Note this kit requires a hole to be drilled into...

With good planning and the right components, a rainwater harvesting system can be nearly maintenance free and the rainwater quality ideal for many uses both in the home, workplace or in industry. A good professional system will have four steps of...