Water Butt Connectors

Combined Rain Diverter and Filter to Connect your Downpipe to your Waterbutt The 3P Filter Collector is a Rainwater Diverter with built in filter, overflow and "OPEN/CLOSE" switch settings. Highly efficient, and quick and easy to install following...

These Long Link Kits with Universal fitting enable the extended connection of a 3P Filter Collector/Rain Diverter to any thin walled water butt where it is possible to access inside the tank to tighten a back-nut. Available in either 1, 2 or 5m lengths...

Tank to Tank Connection Kit This kit links two water butts together where the water butts have a brass or plastic 3/4" BSP threaded port near the bottom of the tank. Idea for situations with some water pressure from standing tanks. How to link two...

These Push-fit Long Link Kits enable the extended connection of a 3P Filter Collector to the 800L Wall Tank or any other sealed tank where it is not possible to access inside the tank to tighten a back-nut. How to connect the Rain Diverter to your Water...

Combined Rain Diverter and Filter to Connect your Downpipe to your Waterbutt The 3P Filter Collector is a Rainwater Diverter with built in filter, overflow and "OPEN/CLOSE" switch settings. Highly efficient, and quick and easy to install following...

Downpipe Filter to Water Butt Connecting Kit For connecting the 3P Filter Collector downpipe filter to your water butt. This kit includes 30cm of 32mm hose (to fit onto the diverting outlet of the downpipe filter) and a hosetail with backnut to fit to...

Combined Rain Diverter and Filter to Connect your Downpipe to your Waterbutt The 3P Filter Collector is a Rainwater Diverter with built in filter, overflow and "OPEN/CLOSE" switch settings. Highly efficient, and quick and easy to install following...

This superb Pump to Water Tank connector enables a water tank to be connected to a pump without any loss of water.This Kit connects a 3/4" BSP Threaded Tank outlet to 1" BSP Threaded Pump inlet. Fit the brass shut off valve to the lowest port in your...

The Pump to Turret Hose connects the Pump outlet to the Turret of your rainwater tank. Designed to fit vertical or horizontal PE, GRP or concrete water storage tanks where the pump is installed inside the tank and the pump has a 1.25" outlet. Ideal for...

Brass hosetail flat seal type washer.The brass Flat Seals makes connecting hoses at either end (to something that can't be turned) a really easy job, simply swivel the seals (rather than the whole hose) to tighten on to the hosetail. 3/4" or 1" options...

The 32mm Flat Bit is ideal for making a 32mm hole in plastic water butts to take the 32mm hose in the Filter Collector Connecting Hose. It is included in the hose and Filter Collector Kits, however if you need a spare, here it is!

Water pipe specifically for rainwater delivery in domestic systems. 25mm diameter in 25m coil.This black pipe is colour coded with 4 x green stripes along the length of the pipe. Also the word "RAINWATER" is printed along one side at approx 50cm...

2" Tank to Tank Connection Kit This kit links two Utility Tanks together where the water tank has a 2" stub near the bottom of the tank. Idea for situations with some water pressure from standing tanks. Note this kit requires a hole to be drilled into...