Additional Information

Site Information

  • 1m Pump to Tank Connector.
  • Tank End with Ball Valve and Flat Seal.
  • Pump End with Brass Double Thread (Nipple) and Flat Seal
  • 1m Pump to Tank Connector (Annotated)
  • Close up of Pump to Tank Connector at the Pump end (with the Brass Double Thread (Nipple) screwed in to the Pump's Non-Return Valve).
  • Close up of Pump to Tank Connector at the Pump end. Tightening the Flat Seal to the  Brass Double Thread which is screwed into the Non-Return Valve (which is screwed into the Inlet of the Pump).
  • Close up of Pump to Tank Connector at the Water Tank end. Note the Ball Valve in the "Closed" position.

Pump to Tank Connector


Prices include VAT


Product Description

This superb Pump to Water Tank connector enables a water tank to be connected to a pump without any loss of water.

Fit the brass shut off valve to the lowest port in your water tank and turn to the off position. When you want to pump the water, connect the connecting hose to the valve at one end, and the other to the pump's inlet. The brass Flat Seals at either end of the hose make this a really easy job, simply swivel the seals (rather than the whole hose) to tighten on to the threads.

The connector comes fully assembled ready for DIY Installation.

Technical Information

  • 1m medium duty hose
  • Connects: 3/4" BSP Threaded Tank outlets to 1" BSP Threaded Pump inlets

Included Components

  • 1 x 3/4" Brass Shut off Valve (Ball Valve)
  • 2 x Brass Flat seal Hosetails
  • 2 x Stainless Steel Hoseclips
  • 2 x Brass Double Nipples
  • 1m Medium Duty Hose

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Customers also viewed

Related Products