Quickstop Advance Valves - Standard
Prices include VAT
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 2 - 2 and get 2% off
- Buy 3 - 5 and get 3% off
- Buy 6 or above and get 5% off
Fast Water Tank or Cistern Fill with this Ballcock Alternative
QuickStop float valves are hydraulic water level regulators with a hydraulically operated closure.
Designed as a replacement to conventional ballcock valves in water tanks to protect booster pumps, the QuickStop goes instantly from fully open to fully closed, preventing repeated stop/start cycling of pumps when filling tanks or cisterns.This makes the pump more efficient, saves energy and wear and tear on the pump.
QuickStop has a very high flow rate allowing rapid filling with minimal pressure loss.
Available in five different sizes, 0.5", 0.75", 1", 1.25" and 1.5" BSP Connections.
It has not been WRAS tested, so is currently only available for non-potable water installations.
Locking lever easily sets the minimum and maximum tank liquid levels. For Quickstop valves which also have an adjustable arm length see our QuickStop Advance - Adjustable range.
Can be used in water tanks, toilet cisterns, roof tanks, header tanks instead of a ballcock and float valve.
When water is drawn from the tank, the QuickStop has a delayed re-start level of approximately 3cm, which further reduces the stop/start frequency of the pump.
What does the QuickStop size refer to?
The size refers to the connections. The Inlet is a BSP sized male thread (the outlet is a male barbed fitting)
|QuickStop Size||Inlet BSP Male Thread Size||Minimum hole required |
(if putting inlet through cistern wall or similar)*
|0.5" (12)||1/2" (12.7mm)||0.825" (21mm)|
|0.75" (18)||3/4" (19mm)||1.041" (27mm)|
|1" (25)||1" (25.4mm)||1.309" (34mm)|
|1.25" (32)||1 1/4 (31.75mm)||1.65" (42mm)|
|1.5" (40)||1 1/2 (38.1mm)||1.882" (48mm)|
* note if drilling a new hole to put inlet through, the instructin manual says to drill 2mm larger.
- BSP Connection: 1/2", 3/4", 1", 1 1/4", or 1 1/2" see options above.
- Operating Pressure: 0.2 to 6 bar
- Max Pressure: 15 bar
- Bursting Pressure: >20 bar
- Operation: Continuous
- Operating Temperature: 0 to 50oC
- CE Mark
- Body: ABS and Nylon
- Float: Polypropylene
- Levers: ABS
- Membrane: Rubber SEBS
- Colour: White for 0.5", Black for all other sizes
- Screws: Stainless Steel
- QuickStop Advance Float Valve (Standard)
- Mesh Filters (optional)
- Washers and Nut
- Installation Instructions
Customers also viewed
£24.48 (inc VAT) £20.40 (ex VAT)
£40.00 (inc VAT) £33.33 (ex VAT)
£243.50 (inc VAT) £202.92 (ex VAT)
£399.00 (inc VAT) £332.50 (ex VAT)