If you have installed your water pump inside a tank and wish to connect it to hard 1" MDPE pipe and then want the pipe to leave the tank at 90 degrees, then this piece of kit is for you.

Suitable for connecting to the 1.25" threaded outlet of your pump. The 1.4m hose then can be taken out of the top of your water tank (or out of the side if there is a suitable hole). The "top" end of the hose is fitted with a 90^o compression adapter to fit to 1" MDPE pipe . 

If you wish to connect to flexible hose, see the Pump to Tank Turret Connector with Hosetail for Hose connection.

Other Pump to Turret connection sets with longer hose lengths.

Optional Extras

50mm Quality Rubber Grommet

These open rubber tank grommets create a watertight seal where a pipe carrying water, rainwater or sewerage passes through the wall of a tank, ensuring no moisture can travel along the pipe length, into or out of the tank.

The DN50 Grommet is an optional extra with the Pump to Turret Set. Add this if you wish to put the Hose through a hole in your Water Tank (rather than through a conduit).

More information about the 3P Technik Open Grommet Seals.

Holesaw and Arbor Mandrel Drill Adaptor Set

Holesaw with Arbor Mandrel Drill Adaptor, to drill a 76mm diameter hole in thin wall plastic tanks. This size hole is perfect for the 50mm Rubber Grommet. The drill set is suitable for PVC, Steel, Aluminium, Wood and Brass. See full details of the Holesaw set.

Included Components

The following items come already assembled ready for you to connect to your Rain Diverter or 3P Filter Collector to your water butt/tank.

• 25mm (1") Heavy duty hose 1.4m
• Hosetail reducers
• 90^o 25mm FBSP Compression Adapter
• 4 x Stainless Steel Hoseclips