Water Butts & Garden Tanks

Ball valve brass nickel plated 1 1/4" (DN32) female thread x male thread 25bar type 104. Easy use quarter turn lever handle. Technical Info: Handle material: steel Material seal: PTFE Temperature range: 0°C - 100°C Operation: lever Colour lever:...

3/4 inch stainless steel hose clip suitable for securing 3/4" garden hose to hosetails etc.Size: 16mm to 27mm Type: W4 12 mm

Elbow Barbs are very handy products that stop garden hoses from squishing flat when they pulled around corners. Pieces of plastic that push fit into two ends of hose to make a right-angled corner. Great for permanent installations of hose around raised...

In-tank Rainwater Harvesting Pump Kit with Mains Water Top-up Set This Rainwater Harvesting Pump Kit is includes everything you need to pump the water out of your Rainwater Storage Tank. It is suitable for all new and exisiting water storage tanks,...

With good planning and the right components, a rainwater harvesting system can be nearly maintenance free and the rainwater quality ideal for many uses both in the home, workplace or in industry. A good professional system will have four steps of...

Spare Filter Insert for the 3P Technik: VF1 Filter, VF1 Combi Filter and Twin Filters. Note: the Twin Filter has 2 of these filter inserts

Spare nylon filter basket with handle foruse only with the 3P Garden Filter. For roofs up to 200m2 Plastic mesh size 1mm Filter with 100% water yield Requires filtered debris to be removed from the basket at regular intervals

This new slimline water butt with integral planter is every gardener's dream! It combines rainwater storage with planting space in a compact and sturdy design. At just 90cm high it will fit under most windows and at just 40cm deep it won't hinder...

These large underground water tanks are prefitted with a 3P Flat Filter so that rainwater from a nearby roof can be pre-filtered before it is stored.  Installing an underground rainwater harvesting tank (with capacities from 6,000L to 20,000L) for...

The 32mm Flat Bit is ideal for making a 32mm hole in plastic water butts to take the 32mm hose in the Filter Collector Connecting Hose. It is included in the hose and Filter Collector Kits, however if you need a spare, here it is!

The 3P Rain Harvesting Pump Kit is designed to go in a rainwater tank. It is available with different length Pump to Tank Turret Hoses to ensure that you can easily connect up your MDPE pipework at the top of your tank. This easy to install kit consists...

This space saving 200 litre Corner Water Butt is a must for keen gardeners. The inventive design fits neatly into 90 degree internal corners. It comes complete with a stand and hoselock compatible tap.The planter section at the top has a drain hole. It...