Spares & Accessories

Spare Blanking Plug for Wall Tank This blanking plug fits into the 95mm diameter hole in the top of the 3P Technik 800l wall tank.  

Battery Operated Water Tank Level Sensor Water Tank Level Indicator for water tanks. The LED display bar lights up in sequence to indicate the level of liquid within the tank. Suitable for Water Tanks, Slimline water tanks, Rainwater Tanks, Grey Water,...

Ball Valve with Hose Connector Utilise the lower 3/4" "draindown" point of your 3P Technik water butt as a tap with either of these "Tap" kits. The 3/4" kit links to a 3/4" Garden Hose (not supplied) using a Hosetail (polypropylene) and Stainless Steel...

Type AA Air Gap or Air Break. The 3P Tundish acts as a Type AA air gap to prevent back-flow. Used with the bracket it ensures compliance with BS8515 and BSEN13076 - "Devices to prevent pollution by back-flow of potable water". Once mounted this...

150mm (6") Plastic Float Ball Made from plastic and 150mm (6") diameter with protruding connection eyelets on either side (approx 25mm). Part of our Floating Intakes, here the round Float Ball can be purchased separately.

This Hole Saw Set comes with Rubber Grommet Seals. It enables you to cut holes into all types of plastic tanks and water butts. It has cutting heads of 25mm, 32mm, 45mm and 58mm diameter. Comes complete with 2 rubber grommets for use with DN32 and DN50...

High quality 3/4" brass bib with a chrome plated finish. Suitable for outdoor use in the garden, they can also be used indoors. They make a stunning finish to any water-butt or water tank.Comes complete with removable hose-tail adapter. When the...

Combined Rain Diverter and Filter to Connect your Downpipe to your Waterbutt The 3P Filter Collector is a Rainwater Diverter with built in filter, overflow and "OPEN/CLOSE" switch settings. Highly efficient, and quick and easy to install following...

Drain Pipe Coupling - Rapid Connector Set - Black 110mm drainage/waste pipe connector set complete with steel nuts, bolts, washers & seal insert. The Double Socket Slip Coupler means that you don't need to move the waste/drainage pipes to fit or to...

1 inch stainless steel hose clip suitable for securing 1" garden hose to hosetails etc.Size: 25mm to 40mm Type: W4 12 mm

Combined Rain Diverter and Filter to Connect your Downpipe to your Waterbutt The 3P Filter Collector Universal is a Rainwater Diverter with built in filter, overflow and "OPEN/CLOSE" switch settings. Highly efficient, and quick and easy to install...

Lid fits 3P Garden Filter and Retention Filters for roofs up to 200m2. Also fits 3P VF1 Filters.Available in Blue and Black.