160 Litre Alana Water Butt with Planter

No reviews yet Write a Review

160 Litre Alana Water Butt with Planter

£297.00 including VAT
£247.50 excluding VAT

✅ Free delivery to most UK postcodes when spending over £50 unless otherwise specified.

✅ Discounts on larger orders! Save 5% on orders over £500 and 10% on orders over £1000

In Stock & Ready To Ship!
Current Stock:Only left:
  • SKU: 90008**K
  • UPC: 5055582907662
3P Technik UK

Frequently Bought Together:

Total: including VAT
Total: excluding VAT
Description

160L Decorative Vase Shaped Water Butt with Integral Planter

The Alana’s unique surface design makes this water butt really impress. This water butt planter is perfect for adding a rainwater storage to your garden and not compromising gardening space, this space saving waterbutt is ideal for passionate gardeners with limited space.

The integral planting space at the top is approximately 27cm deep. The depth allows for gravel or stones at the base of the chamber for drainage (if required).

Also great for gardens in areas that flood as it can be used as a Sustainable Drainage System (SuDS) planter in a Rain Garden to help slow the flow of stormwater.

Available in 2 contemporary colours; Slate and Grey Granite. The Grey Granite Alana has a fleck in the colour which gives a beautiful finish.

Manufactured from dimensionally stable (high wall thickness of an average 6mm), UV stabilised, weather resistant plastic. All threads and connections are metal.

The Alana is sealed unit (the "planter" is not removable and does not have a drain hole) so it is especially important to keep the unit free from sludge and debris as it is not possible to access for cleaning. We recommend that you connect the Alana to your downpipe with a Rainwater Diverter that has an integral filter - like the the 3P Filter Collector (see below). There are two rain diverter connection areas (one on either side of the water butt).

Free Delivery Mainland UK .

Optional Extras

Rainwater Diverter

We recommend installing the 3P Filter Collector along with a Push Fit Long Link Kit. The Filter Collector connects your Water Butt to your Downpipe (via the Push Fit Long Link Kit) and also filters the water, removing any debris, before transferring the water into the tank. The Filter Collector is ideal for roof areas up to 90m2 (other filters are available for larger roof areas). 

The Push Fit Long Link Kit is available in lengths of 0.5m to 5m.

Tank to Tank Connection Kit

A Water Butt Linking Kit can be purchased to join two Water Tanks together using the lower 3/4" brass threaded port.

How to link water tanks together

If you already have a wall tank (or other water butt with a 3/4 inch BSP female threaded connection point near the base of the tank) you can purchase a 3/4" Tank to Tank Connection Kit.


Technical Information

  • Capacity: 160 litre water tank
  • Dimensions: H:116cm, Diameter (max): 55cm, Diameter (base): 41cm
  • Two 3/4” inset brass threaded connection points (1 tap point for a watering can, 1 x interconnection or drain down points at the base)
  • Material: High-quality UV protected polyethylene
  • Recommended rainwater diverter: 3P Filter Collector along with a Push Fit Long Link Kit.

Winter Care Precautions

During extremely cold winters, when daytime temperatures are below zero for several days, it is wise to ensure that the tank is only about 2/3rd's full and the water supply is turned off. This will prevent the frozen water from expanding and damaging the tank.

Documents


Included Components

Each Wall tank is supplied with:

  • Quality 3/4" Metal tap in chrome finish,
  • Wall fixing bracket and screws,
  • 30cm of hose for fitting to the 3P Filter Collector
  • Holesaw set with Rubber Grommets/

Delivery

The Water Butt comes with free delivery to UK Mainland addresses (prices to other places is worked out based on your postcode before checkout).

Footer Start

Celtic Water, Unit 3 Parc Teifi, Cardigan, Ceredigion, SA43 1EW

Phone: 01239 777001